Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They don’t get rotten or rusty like aluminum and timber.

It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is crucial to take the time to ensure that you’re doing everything you can to keep your windows in good condition.

Single-pane windows are fairly simple to replace and typically fit into frames of the past easily. If windows with double glazing repair panes are joined by internal beading, it is difficult to remove and replace the old panes. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass yourself. It is also an excellent idea to lay down a drop cloth before you begin working on the glass to ensure that any fragments of glass fall on the fabric instead of landing on the floor where they could be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it’s a good idea to cover the gap with some clear packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and fix the window. This will also act as a barrier, deterring any intruders from gaining entry into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time, they are susceptible to a range of issues like sliding. A sagging window can cause problems with light, draughts and even security. It is crucial to act when you discover that your uPVC windows are sliding.

Repositioning the hinges can help fix a window that is sagging. To accomplish this, you’ll have to open the window so that you can get to the frame. With the screwdriver, you’ll be able to remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after having relocated your hinges. If you’re satisfied with the fit, tighten the screws until they remain in place.

If you are unable to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. If this happens, it’s essential to replace the seal as fast as possible so that your uPVC windows are waterproof and secure from draughts.

uPVC handles may also become loose. The majority of the time this is due to screws that have come loose over time. However, it can also happen because the handle mechanism has been worn out. It’s relatively simple to fix a loose uPVC hand. The first step is to close the window and then perform an initial test to ensure that it fits. The corners of the sash should align with the casing joint. If it isn’t then you can use a screwdriver to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

It is crucial to take action if wake up every morning to discover mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a fairly simple fix that can be completed by any DIY expert. Based on the severity of the problem the caulking that was used up might need to be removed before a fresh layer can be put on. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk’ as this will only make the area more difficult to clean and Upvc window repairs decrease the efficiency of your energy usage.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious situations, you might need to consider replacing the window.

Other indicators of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the wall near the window. The is a fungus that thrives in damp conditions and can quickly spread throughout the home.

If the leakage occurs between the double glazing-glazed glass it is more likely the problem is related to the seal, not the frame. Again this can easily be corrected by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and blow open with ease it could be the hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical part hinges are prone to be damaged over time. It is an easy procedure, but it is easier if you have someone to help you hold the frame in place.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused either by opening the window incorrectly or a faulty installation at the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be more than happy to give you suggestions.

It is also important to ensure that the hinges are lubricated regularly. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. The ideal time to perform this every year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. The hinges may also become unbalanced due to wear, creating a gap where the sash meets frame. This can be easily fixed by giving them a good clean, but when they’re beyond repair, it might be necessary to have them realigned or replaced. The interlock may be misaligned. This is located on the hinge’s side and could require to be cleaned. In certain instances, it may be necessary to replace these.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and will lessen draughts.

One of the most effective methods to reduce draughts is by using an draught excluder. These are typically fabric tubes that are filled with some type of filler. They can be positioned on the windowsill on top. They will help keep cold air out and keep your home warm and cosy!

With a bit of regular maintenance and repair, your upvc windows will provide an excellent level of insulation and security for your home. However, it is important to recognize that all windows have a life span and there may come a point where it is more efficient to replace them than repair them. So, if you’re having issues with your upvc windows, it is recommended to seek help from a professional as soon as possible.