Double Glazing Door Lock Repairs

Have your uPVC window or door mechanism started to fail? Maybe the window or door handles aren’t able to connect correctly or are difficult to use.

You’ll be wasting energy when your double-glazed doors do not perform as they should. This increases the chance of burglary. Owen the Locksmith will be able to repair your door lock at reasonable costs.

Snapped Key

When a key snaps off inside a lock, it can be incredibly frustrating. It also poses a security risk, as the door may not lock and make you vulnerable to intruders. There are a few easy fixes you can make to resolve the issue and make your door functional again.

First, remember to stay calm. If you get scared and start poking around wildly, you might just end up pushing the damaged piece of the key even further into the lock, making the situation worse.

Next spray WD-40 or another penetrating oil into the lock to help the broken piece slip out more easily. You can also employ a screwdriver in order to break up any stuck pieces that might be blocking the way. If you have a part of the key that is stuck and is not being removed, grab it with the help of a paperclip or any other thin metal object and pull it. Both methods are effective, but you need to be careful not to push the damaged key piece further into the keyway.

Some paperclips have grooved edges that can work in a pinch as a hook extractor and jigsaw blades are also suitable for this purpose. If you don’t have any of these available, install you can use needle-nose pliers to bend them and create a hook. Additionally, a pair of tweezers can be used to grasp and pull out the last piece of the key that was broken.

If you are unable remove the broken piece of key then you can use a lock deicer. It’s available in many hardware stores and works by freezing any moisture present in the lock.

If none of these solutions seem to work, it might be time to consult a locksmith. Fitlocks experts can quickly solve problems with uPVC door locks and mechanisms, including snapped keys and broken handles. They can also alter your double glazing door mechanisms to allow them to operate more easily. Book a double glazing repair with us online or give us a call to discuss your needs.

Broken Cylinder

A broken cylinder can pose a major security risk. A locksmith professional can fix the cylinder. To fix the cylinder, locksmiths must tap it. They can do this using the hammer or any other tool, but the most efficient method is to use a long match or piece of wire. Position the match or the wire end near the keyway. The locksmith can hit the lock to break it open. This is more secure than using a hammer that could cause damage to the lock.

Overheating is the primary cause of cylinder heads cracking. This can happen when the cylinder block and head are made from different metals, like cast iron and aluminium. Different metals will heat up and cool off at different rates. This can cause localized hotspots to expand quicker than the rest.

Another possible cause of cylinder cracks is corrosion. If the cylinder block and head are not maintained correctly they could be corroded or rust and cause them to expand faster than they would normally. This can lead to cracks over time.

If your uPVC door or window lock is brittle or requires lots of pressure to turn, it can be caused by many things. A faulty locking mechanism, misalignment or an old handle are the most common causes of this problem.

This is a simple and affordable fix that the majority of homeowners with double glazing can perform. A professional locksmith can usually fix this problem within one hour of arriving at the home. They can repair the locking mechanisms, or change the window handles, and also change the gearboxes, depending on your specific needs. A professional locksmith will always be able advise you on the most cost-effective solution for your home. They can even recommend upgrades to 3 Star security Euro cylinders, TS007, that will provide an extra layer of security against burglars. It’s a small price to pay for the peace of mind that comes from knowing that your uPVC doors are safe.

Broken Handle

Window handle locks are complex mechanisms that wear out with age and usage, so it’s no surprise that they can break. It can be difficult to determine the reason behind the broken window handle lock and fix it correctly.

Fixing your broken handle, whether it’s an internal latch or the locking mechanism can increase the security of your uPVC door and reduce the risk of draughts. It can be expensive to replace or repair your handle if it is not done correctly and can also harm the frame and lock of your door.

With the window in the open position, loosen the screw holding the handle using a screwdriver. It should be located on the inside face of the back plate, which is usually concealed by a screw cover for aesthetic reasons. It is not recommended to be able to replace any internal parts of the handle such as the plates and levers on either side. Ideally, keep them in the same order so that you can re-install them if needed.

Next, turn the handle until it’s 90 degrees to the window frame. Finally, loosen the screw at the back of the handle which holds it to the internal spindle by using a second screwdriver. Once the screw is loose, remove the handle and take the broken spindle out. Replace it with a new spindle, making sure it’s the same length (you can buy them on the internet or at hardware stores). Securely screw it into the frame. Do not overtighten the screw as this can cause damage to the handle and window frame.

Close the handle and test it. The hope is that it will function smoothly and you’ll be able to open your window once more.

While you’re working on the handle, be sure to check your uPVC windows are shut properly. If they’re not cause damp and draughts inside your home as and also affecting the efficiency of your home’s energy usage. A local window company, like Core Sash Windows, will be able to adjust the hinges on your window frames so they shut correctly.

Broken Spindle

It is quite common that the spindle within the handle is broken, not the handle itself. This is most common in uPVC tilt and turn windows. These windows require a handle which is a lock mechanism that is located in the frame of the window. The handle is attached to a centre rod that in turn activates mushroom-like locking cams, these lock into window frame keeps. If the dead latch mechanism is not able to open when the handle is turned, it is possible that the spindle is broken This can be a frustrating problem.

There are solutions to this issue. A reputable locksmith can quickly and efficiently repair this issue. They will be able to take apart the window handle using a tool that can remove the wheel portion of the mechanism that is where the spindle is. This can be done without causing any damage to the handle or causing any other damage to the frame of the window.

After removing the wheel, the technician can inspect the spindle to determine what caused it to break. This involves breaking the spindle into its individual parts and carefully recording their general condition, as in addition to any specific areas of wear or damage. This procedure is typically carried out by technicians in a clean and safe environment.

The next step is to clean the damaged spindle, this helps eliminate any dirt or other debris that might be obstructing its normal function. After that the spindle is cleaned, it could be repaired or replaced. If the technician is replacing the spindle the dowel can be used that is similar in size to the original. The technician will then drill holes that are identical to both pieces. This will ensure that the spindle fits perfectly with the handle.

If the damaged spindle cannot be repaired it may need to be replaced entirely. Home centres sell generic substitutes but if the window style is rare then you’ll have to speak with an expert in woodworking or cabinet making who can recreate the exact piece. Once the spindle has been installed, it can be connected to the handle. The screw holes on the handle to the screws that are already in the frame. Once the handle is firmly set, you are able to operate your upvc window repairs near me windows.