How to Replace the Replacement Key Battery For the saab car keys 9-3

Saab owners have to follow a series of special steps to install a second ignition key. It requires dealer support using a handheld computer dubbed Tech-2. Then a new car key and transponder must be purchased and then programmed into the car.

It is an excellent idea to rotate your keys in order that one does not get damaged faster than the other. This will also ensure that your keys remain in top shape.

Replacement Case

In contrast to the traditional saab fob key replacement keys of old keys, the new key fobs have electronics inside that make it difficult to create a duplicate. This has made theft of cars considerably more difficult than it was a few years ago. It has also made it more costly to replace keys that were lost.

Saab 9-3 owners should have two keys that work. If one gets lost, it costs a lot of money to replace it in the car because it involves replacing the CIM module and re-programming the locking cylinders. Dealers charge between $100-$200 to do this.

There are several ways to get around these high cost. Certain parts suppliers will utilize the code of the spare key to cut a brand new metal blade for a fraction of the price of the dealer. The key, however, must be identical to the original to work correctly within your car.

Follow these steps to replace the case. You’ll require an open-faced screwdriver and patience. With the screwdriver, you can pry away the plastic and take out the emergency key. Once you have the case opened, take out the electronics and place them inside the new case. Be sure to put the correct key and badge back in the case too.

Replacement Battery

The Saab 9-3 replacement battery is an inexpensive part that can be easily and quickly replaced. This YouTube video from Cyclone Cyd demonstrates how you can replace the battery of the remote fob with only four steps. This tutorial should work with any modern Saab key fob. However, the procedure may differ slightly.

This button is usually placed just below the saab 93 key logo on the back of the fob. The button is usually found on the back of the fob, right next to the Saab Logo. Next take a flathead screwdriver into the small hole inside this button. This will be enough to allow you to open the case of the fob so that you can replace the battery.

Once the new CR1632 battery is in place then you can reassemble your remote key fob and then program it to your car. The entire process shouldn’t take more than an hour. This is a straightforward process that doesn’t require any special tools.

If you lose a key, the process will be a bit more involved but it is still able to be done. The dealer will need to determine the VIN of the car and then request a replacement key blade and a TWICE module with the correct unique code. The dealer will then need to program the key using MDI an innovative software tool.

Replacement Key Fob

The key fob is the piece that locks and unlocks your car, it’s got batteries inside. Batteries have a limited lifespan and eventually die. It’s a common issue for all vehicles. The good thing is that you can replace the battery in most key fobs without having to replace the entire case. You can purchase replacement fobs from Amazon that include all the electronics already installed, which means you can just pop open the case and replace those batteries that are old. It is necessary to remove the emergency key before you can replace the batteries. To do this, place the screwdriver of a small flat head into the slot in the middle of the. The case will split as you work the screwdriver all around it.

If you’re planning to replace your keys, be sure to have a spare available. This will save you a lot of money. If you have a spare, you can ask the dealer to cut the new key and program it to your car, which is much cheaper than replacing the entire key fob.

It is possible to add another key to your vehicle if you don’t already have one, but it will require an extensive amount of research and effort. Adding a second key costs a few hundred dollars, and also requires programming of the car’s computer. This can be done by a professional, but it’s a costly option for the majority of owners.

Replacement Ignition

Contrary to earlier Saab automobiles, the new SAAB 9-3 models feature an upgraded alarm system that is dependent on a coded keys. This means that in the event that you lose your only working key, adding another one can be very expensive since the car has to have a specific computer module fitted and also must be specially programmed to accept an extra key. Locksmiths typically aren’t able to program this, and even dealers can charge several hundred dollars to program the new key!

Dealers will charge you a premium to replace your car computer (also known as the CIM or saab spare key twice) If you lose your only functioning key. Instead, we can reprogram the EEPROM on your existing car computer, preparing it for an additional key, and save you over 50% of what you’ll pay at a dealership.

If you’ve been a faithful owner of an 03-11 saab 93 key fob 9-3, you probably realize that the ignition key isn’t very durable. If the ignition key you have isn’t working correctly, you should think about replacing it. They can become extremely sticky and the buttons are known to fall off. Luckily, replacing the ignition key isn’t as difficult as it sounds, and it can be done quickly using the proper tools.